Magnetek T-series Soft Start 460V, 2HP, 4.1 max FLA

*** DISCONTINUED ***

Magnetek's IMPULSE•T has made drive programming so easy you can get your crane up and running in a few simple steps. This affordable drive platform makes the IMPULSE•T the ideal solution for contactor control upgrades and basic modernizations.

The IMPULSE•T comes standard with a 120VAC digital interface card with 5 programmable inputs, and can also be fitted with 48VAC, 24VAC, and 24VDC interface cards to meet unique design needs.

UL® recognized motor overload protection comes standard with the IMPULSE•T, protecting your motor and peripheral electronics from damage when a mechanical failure occurs. Preventative maintenance monitors provide the feedback you need to proactively schedule maintenance and minimize downtime.

Performance Features:

Digital and analog reference sources

Up to 8-speed multi-step digital speed reference

2-step infinitely variable speed reference

1 analog speed reference: 0-10VDC, 4-20mA, 0-20mA

Built-in dynamic braking transistor

1 form C output contact 1 A at up to 250VAC or 30VDC

1 analog monitor output: 0-10VDC proportional to output frequency or current

X-Press Programming™ allows programming initial setup within seconds

Maintenance timers - operations, cooling fan, soft charge bypass relay, and IGBT

Fully adjustable volts/hertz pattern

DC injection braking

Electronic reversing motor leads

Automatic fault reset

Adjustable acceleration/deceleration: 0.0 to 25.5 seconds

Fault history

Hardware and software current limit

Specifications:

CMAA Class A-D Service

Overload capacity: 120% for 60 sec.

40: 1 speed range

Starting torque of 150% @ 3Hz

Certifications: UL, cUL, RoHS, CE

Ambient service temperature: -10° to 50°C (+14° to 122°F)

Input voltage: 200 to 240VAC, 380 to 480VAC, -15% to + 10%

Input frequency: 50/60 Hz; ±-5%

Ratings: 380-480VAC, 3/4 to 5HP 200-240VAC, 1 to 3HP